Park Amplification PMV800 Handwired EL34 Amp Head & 2x12 Cab (B-stock)

Information

B-stock w/ Full Warranty. We are an authorized Park Amplification dealer! 

Like what you see? All photos are of the exact item you will receive. This amp was featured at the NAMM music trade show. The speaker cab has two small scuffs on the front edge, which we have depicted in close-up photos. Otherwise, the rig is in flawless condition. Head and cab are both covered by full Park Amplification warranty and will ship in original packaging.

The handwired Park Master Volume. When Marshall famously linked the Master Volume’s channels the JCM800 was born. This Master Volume circuit would become ubiquitous in rock music through the 70s and 80s and set the benchmark for a generation of high-gain Rock and Metal guitarists.

The PMV800 builds on this legendary foundation using high quality handwired components and adding features that allow an even greater range of tonal options to this famous circuit. With a Post-Phase Inverter Master Volume, an effects loop, gain and tonal mods, and high-spec components and transformers, the Park PMV800 is a unique rock machine.

The PPIMV (Post-Phase-Inverter Master Volume) allows guitarists to drive the power section harder at lower volumes - this feature is removed from the circuit when turned fully open. A Bright switch has been added to turn off the amps ‘stock’ bright cap to remove unpleasant high end (depending on guitar/pickups), a Mid-Boost for varying levels of thickness, and a three-way Gain Switch which offers both lower and higher levels of gain than ‘stock’.

Please note that all additional features can be “turned off” or removed from the circuit allowing the PMV800 to return to “stock” mode for vintage correct feel and response!

INCLUDED: Park SA-212 Angled Grill Speaker Cabinet

AMP FEATURES

— First Jim Marshall Amp to have a 'master volume'

— 800 Series Amp - dominant sound of the 80’s

— EL34 tubes (Classic British Tone)

— 45 Watts clean, 65 Watts cranked

— Solid state rectifier

— High 5 stage filtering

— 2 inputs (hi/low)

— Hi input cascades through 4 gain stages

— Low input travels through 3 gain stages

— Bright switch adds back ‘original’ bright level

— Mid boost adds low mids and bottom end

— Cascading Gain Channels simply sound better with PrePIMV

AMP SPECS

Output — 2 x Parallel Speaker Out (4/8/16 Ohm Impedance)

Road Ready — Rugged 18mm Birch-Ply Construction

Band Ready — 'Soak Tested' by our Custom Shop Technicians

Touring Ready — World Voltage and Impedance Selectors

Based on Hiwatt's original circuit designed by Dave Reeves

Original Partridge spec English transformers

Meticulously hand-wired to Harry Joyce's exacting military standards

Proudly manufactured in the Park Custom Shop (England)

CAB FEATURES

— Historical dimensions and materials used for sonic integrity

— Authentic angled ‘A Style’ Cabinet

— 212 with Creambacks (130 watts)

— 8 Ohm Cab