Used Two Rock Classic Reverb Signature w/ 212 Cab – Moss Green Suede

Information

Condition: Used, Very Good

Like what you see? All photos are of the exact amp and cab you will receive. There are a few minor water stains in the suede on the side of the 2x12 cab. We have included closeup photos so you can take a look!

Just in via trade! You won’t find a cooler Two-Rock Classic Reverb Signature. The green suede is totally boss, and boy, does this amp sound amazing. With so many tonal shaping options, you’d be hard pressed to find a more versatile clean platform.

From Two-Rock:

The single-channel Classic Reverb Signature is Two-Rock’s ultimate tone shaping machine. This harmonically rich amp can be pushed into beautiful clean or overdriven tones while still retaining the guitar’s natural voice.

This Classic Reverb Signature is built on a silver anodized thick aluminum chassis. This model features our proprietary output transformer as well as an all tube analog spring reverb, 3-position Gain Structure switch, foot switchable FET circuit, tone stack bypass, and Reverb Defeat which all together gives this amp a wide range of tonal possibilities, and have made the Classic Reverb Signature such an integral part of so many artist’s guitar rigs.

The 3-position Gain Structure switch changes the front end sensitivity and overall feel of the preamp; in the down position the amp feels similar to a vintage black-panel, the middle position is much like the Two-Rock Matt Schofield Signature front end with a hotter input stage, and the full up position is our traditional Two-Rock front end.

On the 100/50 watt version the power output is switchable from 100 watts to 50 watts. When switching wattages on the 100/50w and 40/20w versions, our proprietary output transformer compensates for impedance and phase differences so there is no adverse affect on the tone or feel of the amplifier.

Amp Configuration

100w/50w (4)6L6 (half power scaling)

Speaker outputs

4ohm, 8ohm, 16ohm

Features

FET Circuit with Gain control, Tone Stack Bypass, Tube driven analog Spring Reverb with separate Send and Return controls. 3-position Gain Structure Switch. Contour control, High/Low Power Switch, foot switchable FET, Bypass, and Reverb Defeat

Passive Effects Loop

Head Dimensions

20 5/8"W x 12"H x 10 5/8"D (43 LBS)